Plash® 2100

is a one-part, moisture-curing RTV (room temperature vulcanizing) acetoxy silicone that cures to a strong, washable, silicone rubber which maintains long-term durability, adhesion and flexibility. Excellent for a marine environment such as adhering our flexible light strips to pontoon boats or under the gunnels. Acetoxy has natural antibacterial properties and is suitable for kitchen and bath areas & NOT TO BE USED BELOW THE WATERLINE - UNLESS USED TO SECURE LEDS UNDER GATORBAK BUNK COVERS.

Non-slumping sealant. Can be applied to vertical or overhead surfaces without flowing or sagging. Because Plash® 2100 is a 100 percent silicone sealant, it has excellent resistance to weathering including ozone, ultra-violet radiation, freeze-thaw conditions and airborne chemicals.  During cure, an acetic acid smell is produced. 250 PSI Tensile, 400 percent Elongation.

A simple bead on the back of the strip light, stick it, wipe away the excess, and you're done!  Plash® 2100 Marine Silicone provides an instant hold for IP68 flexible tape lights.  A temporary fastener may be required and each end until cured as the weight of the wire may pull it off.

Excellent adhesion of our Flexible LED Light Strips to:

• bedliner
• sheet metal
• wood
• aluminum 
• concrete
• polycarbonate
• brick
• concrete
• glass
• fiberglass
• carbon fiber
• plastic
• and more!

This is not regular silicone like the ones sold at the big box stores.  Those will not bond with our lights.  Even 3M® 5200 and Life Seal® will not bond to our flexible LED lights.  Our strips must use this Plash 2100 silicone.

FEATURES:

• 100% RTV Silicone with no slump
• Can be applied overhead or vertically without sag
• Cures at room temperature and is tacky in 10 minutes
• Excellent resistance to mother nature including UV, high & low temperature changes including freezing, salt water and airborne chemicals
• Cures to a strong silicone rubber made to last
• Instant adhesion to Plash Flexible Light Strips

SOLD INDIVIDUALLY (INCLUDES 1 TIP)

MSDS SHEET: